Oven Not Heating? 7 Common Causes and How to Fix Them

Nothing ruins a family meal or holiday dinner faster than preheating your oven only to open the door 20 minutes later and feel cold air. Whether your oven refuses to warm up at all, takes forever to reach temperature, or leaves your food half-baked, the issue almost always traces back to a single failed heating or ignition component.

At C&E Pro Appliance Repair, we help homeowners throughout Attleboro, and surrounding Massachusetts and Rhode Island neighborhoods, diagnose and repair oven problems fast. Here are the seven most common reasons an electric or gas oven stops heating—and what you can safely check before calling a technician.

Common Causes When an Electric Oven Is Not Heating

Electric ovens rely on steady 240-volt power and intact heating elements to bake and broil. If your electric oven isn’t heating up, check these four culprits first:

1. Burned-Out Bake or Broil Element

The bake element sits along the bottom of your oven cavity, while the broil element is mounted at the top. When working properly, they glow a bright, even orange. Over time, extreme heat causes these elements to blister, crack, or burn out internally.

  • Quick Check: Turn the oven off and let it cool completely. Inspect both elements with a flashlight for visible cracks, pitting, or dark burn spots. If the bake element is damaged, your broil setting might still get hot while regular baking stays cold.

2. A Partially Tripped Circuit Breaker

Your oven’s digital clock, control panel, and interior light run on 120 volts, while the heating elements require the full 240 volts. If one side of your home's double-pole circuit breaker trips, the display will light up normally, fooling you into thinking the oven has power even though it cannot generate heat.

  • Quick Check: Go to your electrical panel, find the double breaker labeled for your range or wall oven, flip it completely OFF, and switch it firmly back ON.

3. Blown Thermal Fuse

Many modern electric ovens—especially wall ovens and self-cleaning ranges—include a built-in thermal fuse designed to cut power to the heating circuit if the unit overheats. Running a high-heat self-clean cycle is the #1 trigger for a blown thermal fuse. Once it trips, it may not always be reset and must be replaced.

4. Faulty Control Board Relay

If your bake and broil elements look fine and your breaker isn't tripped, the problem may be on the main electronic control board. Small relays on the board send voltage to the heating elements; if a relay burns out, the oven will click as if it's trying to heat, but no power ever reaches the elements.

Common Causes When a Gas Oven Is Not Heating

Gas ovens use an electric igniter and a safety gas valve to light the burner tube beneath the oven floor. If your gas oven won’t heat up, look at these three components:

5. Weak or Failed Gas Oven Igniter

A worn-out igniter is the single most common reason a gas oven stops heating. On modern gas ovens, the igniter must draw a specific amount of electrical current before the gas safety valve will open. Even if you look beneath the oven floor and see the igniter glowing orange, it can still be too weak to trigger the gas flow.

  • Signs of a weak igniter: The oven takes 15 to 30 minutes too long to reach temperature, heats intermittently, or glows brightly without ever lighting a flame.

6. Faulty Gas Safety Valve

If the igniter is drawing the proper electrical current and glowing hot, yet no gas releases to light the burner, the gas safety valve itself may be stuck closed. Because this component controls raw gas flow, it should always be tested and replaced by a licensed appliance technician.

Applies to Both Gas and Electric Ovens

7. Malfunctioning Oven Temperature Sensor

Inside the upper back corner of your oven cavity sits a thin metal rod—the temperature sensor. This sensor constantly measures internal heat and communicates with the control board. If the sensor fails or drifts out of calibration, it may tell the computer that the oven is already at 350°F when it is actually cold, shutting off the heat prematurely.

Fast, Local Oven Repair in Attleboro, MA & Rhode Island

Troubleshooting 240-volt wiring, electronic control boards, and gas ignition valves requires specialized meters and strict safety precautions. If resetting your breaker or checking your oven settings doesn't get the heat back on, let our local experts handle the repair safely.

At C&E Pro Appliance Repair, we repair all major oven and range brands—including Whirlpool, GE, Samsung, LG, Frigidaire, KitchenAid, Bosch, Wolf, Viking, and Thermador—across Norfolk, Plymouth, Bristol, and Providence counties.

  • Need fast answers? Call or text us directly at (774) 462-7453 for 24/7 instant text assistance.

  • Ready to schedule? View our real-time openings and book your repair online at candeappliance.com.

Frequently Asked Questions (FAQ)

Why does my oven light and clock work, but the oven won't heat up?
On an electric oven, this usually means one leg of your 240-volt double circuit breaker has tripped, leaving 120 volts for the lights and clock but not enough power to heat the elements. On a gas oven, it typically points to a burned-out igniter.

Why is my gas oven glowing orange but not lighting?
A gas oven igniter can still glow orange even after it has weakened too much to draw the electrical current needed to open the gas safety valve. Replacing the igniter almost always resolves this issue.

Should I use my oven's self-clean cycle?
We generally recommend avoiding high-heat self-clean cycles, as the extreme temperatures frequently blow thermal fuses and damage electronic control boards. Wiping down spills with warm, soapy water or a gentle oven cleaner is much safer for your appliance.